Loading...
TEC200 Digital temperature controller
Koheron TEC200 is a digital temperature controller with the following features:
- Up to 8 V / 4 A operation.
- Low output noise (< 10 µVrms in 0.1 Hz - 10 Hz bandwidth).
- High power efficiency.
- -40 °C to 85 °C operating temperature range.
- On-board monitoring and diagnostics.
From 675 €
Resources
Specifications
| 4V | 8V | |
|---|---|---|
| TEC driver | ||
| TEC current | ±4 A | ±4 A |
| TEC voltage | ±4 V | ±8 V |
| Low frequency noise0.1 Hz - 10 Hz | 5 µVrms (4 V / 4 A) | 10 µVrms (8 V / 4 A) |
| Wideband noise10 Hz - 1 MHz | 25 µVrms (4 V / 4 A) | 50 µVrms (8 V / 4 A) |
| Output voltage ranges | 1.25 V / 2.5 V / 4 V | 1.5 V / 3 V / 8 V |
| Thermistor | ||
| Thermistor type | NTC | NTC |
| Nominal thermistance | 10 kΩ | 10 kΩ |
| Sensing temperature coefficient10 kΩ | 100 µK/°C | 100 µK/°C |
| Power supply | ||
| Input voltage | 7 V to 18 V | 11 V to 33 V |
| Input current limit | 4 A | 4 A |
| Input power limit | 25 W | 50 W |
| Surge voltage1 s max. | ≤ 50 V | ≤ 50 V |
| Quiescent currentTEC OFF | 4 mA (12 Vin) | 3 mA (24 Vin) |
| Other | ||
| Outside dimensions | 91 mm x 60 mm x 17 mm | 91 mm x 60 mm x 17 mm |
| Weight | 83 g | 83 g |
| Operating temperature | -40 °C to 85 °C | -40 °C to 85 °C |
Power efficiency
Thanks to its hybrid architecture, the TEC200 provides high power efficiency over a wide range of input voltages and loads, while preserving the low noise and precision expected from a linear driver:
Output voltage noise
Voltage noise between the TEC+ and TEC- pins measured when driving 4 V / 4 A with a TEC200-4V:
Temperature sensing stability
Temperature sensing variation when measuring a high stability 10 kΩ resistor over the -40 °C to 85 °C operating range:
